bristol, pa 19007-6810 usa tel (215) 781-9956 ? fax (215) 781-9845 printouts of this document may be out of date and should be considered uncontrolled ? info@arieselec.com www.arieselec.com features ? r educe hdi construction by adapting smaller pitch devices to larger footprints ? c onvert 0.4mm and 0.5mm pitch footprints to 1mm or 1.27mm pitch (please con - tact factory for other pitch requirements) ? e nable the use of standard line and trace spacing ? e liminate the need for laster-drilled microvias motherboards general specifications ? board material : 0.062 thick fr-4 or rogers 370 hr, with 1/2-oz. cu traces, both sides ? p ads: finished with enig (electroless ni immersion au), nsmd ? solder spheres : 63/37 sn/pb or pb-free sac 305 ? trace width/space : 0.003 [0.762] ? o perating temperature: 221f [105c] fr-4, 266f [130c] pb-free mounting considerations ? suggested pcb pad size : 0.022 [0.55] for 1.27mm pitch; 0.020 [0.50] for 1.00mm pitch 18106 rev. ab bga switch-a-pitch adapters customization : in addition to the standard products shown on this page, aries specializes in custom design and production. special materials, platings, sizes, and configurations can be furnished, depending on the quantity. note : aries reserves the right to change product general specifications without notice. all dimensions: inches [millimeters] all tolerances: 0.005 [0.13] unless otherwise specified ordering information to obtain a quote for a specific adapter, please email a request to info@arieselec.com with the following information: ? y our name, company name, and telephone number ? a drawing or data sheet of the device to be placed on adapter (top image) ? a drawing or data sheet of the target footprint for the adapter (bottom image) ? a list of any other design parameters or restrictions that must be considered ? t he quantity of adapters to be quoted
|